| |
DCC POWER SUPPLIES
Only Tony's offers these high performance plug'n'play
power supplies with input/output circuit breakers at such a great
price. All DCC systems require a basic supply that converts 120V
AC to the voltage required by DCC. These inexpensive power supplies,
prewired with wall plug, input and output circuit breakers, are
ready to run the DCC system of your choice.
|
|
 |
|
High Performance Model Railroading
DCC Power Supply recomended for Digitrax, Lenz, NCE,
and other DCC systems. Outperforms all other comparable
models in power, safety, and features! Grounded, fail-safe
three-wire input and output; Illuminated rocker power
switch; Circuit breaker protection on the output; 6
A, 15 VAC Output, Input 120 VAC; Sealed unit - impact
resistant enclosure
Model No. MF615, DCC Power Supply: Class 2 SELV Transformer
MORE INFO,
INSTALLATION, TEST
PICTURES
|
|
|
|
|
|
0.5A, 12V DC Power Supply for Digitrax
UP3, UR90, UR91, PM4.
|
|
|
|
|
|
12V DC, 1A auxilliary power for NCE/System
One, DCC throttle networks.
|
|
|
|
4 A DCC power supply, for use with NCE SB3 and DB3 |
|
|
|
|
|
18 volt AC, 12 Amp DCC power, runs
10A DCC boosters.
|
|
|
|
|
|
20 Amp Power Supply for DCC
Regulated power supply gives more booster power with
less heat. Run up to four 5 Amp command stations and/or
boosters with this supply. Scale selectable DC output
voltage: N scale 13.8 VDC 20Amps, HO Scale 18.0 VDC
15Amps, G Scale 23.0 VDC 12Amps. DC Ammeter. On/Off
Switch. 2 Output Connector Posts accept spade lugs or
banana plugs. Integral cooling fan. Design coordinated
to match your other Digitrax system components.
Available November 15, 2004.
|
|
|
