| |
DCC Specialties
Link to
manufacturer
See also
Product Automation
|
 |
The Block Watcher™ is a new concept in block detection.
This detector puts the power of a microprocessor to work analyzing the current feed to the rails. This detector has been designed to eliminate many of the installation problems associated with the installation of signal systems. The Block Watcher comes ready to install, all you have to do is to connect it between the DCC booster or circuit breaker and the rails. Then connect the detector output switch to your signal system.
The Block Watcher™ has many uses and applications.
It can not only be used as the basis of signaling systems, but can also be used to indicate occupied blocks or triggers for Stop-On-DCC decoders. The Block Watcher is powered from the DCC input power and eliminates the need for an added external power supply. The output is optically isolated so the signaling system can be separate from the DCC signal and thus minimize the interference with operation of the signal circuits. The detector will handle up to 20 Amps of DCC current. An automatic adjustment for leakage current up to 130 mA is provided. Detection output terminals are available for a switched output and remote LED block detect indication. The bi-polar output can be used with any signaling system using less than 30 Volts and will switch up to 1 A of current.
More
Info, Features in Detail
Review
|
|
PSX-AR Auto Reverser / Circuit Breaker
DCC
Specialties |
from $47.95
List from $59.95 |
|
 |
Patent pending.
PSX-AR DCC Solid State Auto Reverser-Circuit Breaker w/integrated (Stall Motor)
Stationary Decoder.
Automates Reverse Loop Turnouts.
List $59.95
PSX-ARFB DCC Solid State Auto Reverser-Circuit Breaker w/integrated (Stall Motor)
Stationary Decoder and network Feedback.
Automates Reverse Loop Turnouts.
List $64.95
PSX-ARSC DCC Solid State Auto Reverser-Circuit Breaker w/integrated (Snap Coil)
Stationary Decoder.
Automates Reverse Loop Turnouts. List $69.95.
PSX-ARSCFB DCC Solid State Auto Reverser-Circuit Breaker w/integrated (Snap Coil)
Stationary Decoder and network Feedback.
Automates Reverse Loop Turnouts.
List $74.95
Introduction
Manual (PDF, external link)
PSX Hints (PDF, external link)
PSX vs. OnGuard? | How To Wire A Long Reverse Loop
Adding Push Button Control (ext. link) |
|
|
 |
Patent pending.
PSX1 DCC Solid State Power District Circuit Breaker, 1 Block, 0-20 Amps.
List $39.95
PSX2 DCC Solid State Power District Circuit Breaker, 2 Block, 0-20 Amps/Block.
List $79.90
PSX3 DCC Solid State Power District Circuit Breaker, 3 Block, 0-20 Amps/Block.
List $119.95
PSX4 DCC Solid State Power District Circuit Breaker, 4 Block, 0-20 Amps/Block.
List $159.80
All PSX Series DCC Circuit Breakers include Network Feedback at no extra
charge. Feedback, Shorted and Occupancy Status to Digitrax
(LocoNet), Lenz (ExpressNet) and NCE (CabBus).
Introduction
Model Railroader Review
Preliminary Manual (PDF, external link)
PSX Hints (PDF, external link)
PSX vs. OnGuard?
|
|
|
 |
Patent pending.
PSX-1AC (3-Rail) AC Solid State Power District Circuit Breaker, 1 Block, 0-20 Amps. List $39.95
PSX-2AC (3-Rail) AC Solid State Power District Circuit Breaker, 2 Block, 0-20 Amps/Block. List $79.90
PSX-3AC (3-Rail) AC Solid State Power District Circuit Breaker, 3 Block, 0-20 Amps/Block. List $119.95
PSX-4AC (3-Rail) AC Solid State Power District Circuit Breaker, 4 Block, 0-20 Amps/Block. List $159.80
Introduction
Info and Manual
|
|
Hare™ - Tortoise™
New Generation I. Combos
DCC
Specialties |
$varies
List $varies |
|
 |
|
|
|
Hare™ - Tortoise™
New Generation II. Combos
DCC
Specialties |
$varies
List $varies |
|
|
|
|
The Tortoise™, the Tortoise™ Logo and the Tortoise™
graphic are trademarks of Circuitron, Inc. of Romeoville, Il. They and all photos
of the Tortoise™ are used with permission. The Hare™ is a product
of DCC Specialties, which is in no way affiliated with Circuitron, Inc.
|
|
 |
|
High Performance Model Railroading
DCC Power Supply recomended for Digitrax, Lenz, NCE,
and other DCC systems. Outperforms all other comparable
models in power, safety, and features! Grounded, fail-safe
three-wire input and output; Illuminated rocker power
switch; Circuit breaker protection on the output; 6
A, 15 VAC Output, Input 120 VAC; Sealed unit - impact
resistant enclosure
Model No. MF615, DCC Power Supply: Class 2 SELV Transformer
MORE INFO,
INSTALLATION, TEST
PICTURES |
|
|
|
 |
|
DCC Programming
Booster. Compatible with Digitrax, Lenz, NCE and all
other DCC systems.
Note: Once installed you should
leave set-up for all programming.
Foreign users with 220-240 VAC will need to furnish
their own power supply, Input: 16-18 VDC and 200 mA
max.
DETAILS
PICTURES
|
|
|
|
 |
|
Low cost circuit
breaker.
Note: Not for direct current (DC) applications.
• 4 Amps
• Easy to Install Screw Terminals
• No Relays
• 1 Year Warranty
• Low Cost
• No Power Supply Required
PICTURES
PSX vs. OnGuard? |
|
|
