| |
Sound Decoders
SDH104K1 Combo (SDH104K1 + FN04K1) A, B, or C
Digitrax |
$69.95
4 @ $64.95
List $79.98 |
|
 |
Replaced by SDH164K1 (ABC)
This combo pack gives you everything
you need to have realistic operation, sound, and lighting in your
locos. Install the FN04K1 on your SDH104K1 before installing in your
locomotive and you’ll have SoundFX™, LocoMotion® and
Functions!
See also Tony's Custom Digitrax Sound Files
Announcement
Preview |
|
|
|
Sound/Motor/Function Decoder
1 Amp Continuous/2 Amp Peak Rating
6 FX3 Functions
Wired decoder can be installed in almost any HO Loco
Full Digitrax Series 3 mobile decoder feature set
Speed Tables
Simplified Scaleable Back EMF
Advanced Consisting
Transponding
Supersonic Motor Drive
Decoder Lock
Factory Reset Feature
Physical dimensions: 1.273" x 0.67" x 0.25" /
32.4mm x 16.9mm x 6.3mm
Includes 28mm 32 Ohm speaker
Includes 330uF capacitor
Preloaded with generic diesel and steam sound schemes
See also Tony's Custom Digitrax Sound Files |
|
|
|
Sound/Motor/Function Decoder
Board Replacement Sound/ Motor/ Function Decoder for Kato HO GE AC4400. (Replaces SDH104K1A Combo) Preloaded with GE AC4400 diesel sound scheme. Includes 28mm 32 Ohm Speaker.
See also Tony's Custom Digitrax Sound Files |
|
|
|
Sound/Motor/Function Decoder
Board Replacement Sound/ Motor/ Function Decoder for Kato HO END SD38-2. (Replaces SDH104K1B Combo) Preloaded with EMD SD38-2 diesel sound scheme. Includes 28mm 32 Ohm Speaker.
See also Tony's Custom Digitrax Sound Files |
|
|
|
Sound/Motor/Function Decoder
Board Replacement Sound/ Motor/ Function Decoder for Kato HO EMD F40PH. (Replaces SDH104K1C Combo) Preloaded with EMD F40PH diesel sound scheme. Includes 28mm 32 Ohm Speaker.
See also Tony's Custom Digitrax Sound Files |
|
|
|
Sound/Motor/Function Decoder
Board Replacement Sound/ Motor/ Function Decoder for Kato N-Scale p42, E8, PA1, F40 and similar locos. Preloaded with a dual E8/F40 diesel sound scheme. Includes 18mmX13mm 8 Ohm Speaker.
See also Tony's Custom Digitrax Sound Files |
|
|
|
Sound/Motor/Function Decoder
1 Amp Continuous/2 Amp Peak Rating
4 FX3 Functions
Great for N Scale, HO and HOn3 Locos!
8 Pin Short Harness
Full Digitrax Series 3 mobile decoder feature set
Speed Tables
Simplified Scaleable Back EMF
Advanced Consisting
Transponding
Supersonic Motor Drive
Decoder Lock
Factory Reset Feature
Physical dimensions: 1.22" x 0.405" x 0.164" / 31mm x 10.27mm x 4.16mm
Includes 18 x 13mm 8 Ohm speaker
Includes 330uF capacitor
Preloaded with generic diesel and steam sound schemes
See also Tony's Custom Digitrax Sound Files |
|
SFX004
Digitrax. |
$42.95
4 @ $39.95, 10 @ $38.95
List $49.99 |
|
|
SFX004 "Sound Bug".
Plugs into DH165 series decoders.
Downloadable with PR-2.
Coming soon, pre-orders accepted.
Because of its size the Sound Bug puts out about +/- 3 volts whereas our other sound decoders put out approx. +/- 6 volts thus the sound volume is less. This can be overcome by using an 8 ohm speaker instead of the 32 ohm one that comes with it.
See also Tony's Custom Digitrax Sound Files |
|
|
|
New N-scale and narrow gauge wired sound only decoder for use with any existing DCC decoder.
16 megabit capacity for more complex projects!
4 functions
.405 x 1.2 x .175 (10.25mm x 30.76mm x 4.1mm) (approximate measurements)
See also Tony's Custom Digitrax Sound Files |
|
|
 |
SoundFX and Function Decoder
Add Digitrax SoundFX and 6 extra functions to any
DCC installation!
Fits most HO installations.
Ready to run, pre-loaded with realistic generic
steam and diesel sound projects.
32 Ohm 28 mm speaker included (others can be
used, too).
External hold up capacitor for flexible installation.
Completely customizable for super detailed
locomotive sound.
Downloadable sound with PR2 Programmer.
6 FX3 Function outputs let you add more functions
to your installations.
Based on proven Digitrax decoder technology.
Low current draw and smart power management
let you run as many Sound FX decoders as your layout can handle without booster shutdown
problems.
No special programming booster or other extra
equipment needed for programming.
See also Tony's Custom Digitrax Sound Files
Announcement |
|
PR3 USB Decoder Programmer/Interface
Digitrax |
$69.95
List $84.95 |
|
|
Multifunction USB 2.0 PC connectivity for your railroad.
Digitrax "SoundLoader" compatible. Programs Digitrax sound projects to SFX decoders.
Programs CVs for most DCC decoders
LocoNet MS100 mode with fully buffered input and output data
Runs on Windows XP, Vista and 2000.
Runs on Mac OS 10.4/10.5 with JMRI.
No external power needed for MS100 mode.
Automatic configuration. No jumpers or switches required.
Configurations can be set by software or manually.
Selectable LocoNet termination. For standalone operation without a Command Station.
LED state indicator lights.
Small, convenient package
Future firmware updates available from Digitrax Web site.
Meets FCC Class B requirements. |
|
|
