| |
Stationary Decoders
See also NCE Mini Panel Makes Control Panels Easy As 1-2-3.
Hare™ - Tortoise™
New Generation I. Combos
DCC
Specialties |
$varies
List $varies |
|
 |
|
|
Hare™ - Tortoise™
New Generation II. Combos
DCC
Specialties |
$varies
List $varies |
|
|
|
|
DS51K1
Digitrax. |
$11.95
4 @ $11.50
List $14.99 |
|
 |
|
Stationary decoder for Kato Turnouts
(Unitrak), One Output.
|
|
|
|
|
|
Dual Stationary Decoder. Control
2 slow motion turnout machines or Control 2 solenoid type turnout
machines or Control 2 Kato Unitrack or LGB turnouts.
Quick setup, independent addresses.
More
details at Stationary Decoder Comparison
|
|
DS 64
Digitrax. |
$49.95
4 @ $47.95, 4 @ $46.95
List $59.99 |
|
|
|
Quad Stationary Decoder, operates
solenoid, slow motion, Kato + Aristocraft
switch machines
|
|
TF4
Digitrax. |
$17.75
4 @ $16.75, 10 @ $15.75
List $20.95 |
|
|
|
Quad DCC Function Decoder with Integrated
Transponder. Four 125mA (250mA peak) function output for lights or
other functions; Functions can be turned on/off using F0-F12; Supports
both 2 digit and 4 digit addressing; Programmable from DCC compatible
equipment; Configurable Strobe feature lets you simulate flashing
lights like FRED,Strobes, Mars Lights, etc. on the yellow and white
leads; Standard On/Off Function operation available on green &
violet leads; Compatible with Digitrax DCC Transponding Systems; Approximate
size: 0.461” x 0.31” x 0.161” (11.7mm x 7.8mm x 4.1mm)
|
|
SE8C Signal Decoder
Digitrax. |
$99.95
List $125.00 |
|
|
|
Control signals on your layout manually with any LocoNet Throttle and Command Station or automatically with detection and compatible computer software such as RR & Co. and WinLok. Drives up to 32 signal heads with popular LED signal types. Simple modular wiring. 16 inputs, 8 Control lines for local turnout control, 8 occupancy sensor inputs. DC or DCC controlled layouts
MORE INFO
|
|
SMBK Signal Mast Base Kit (Due September 15)
Digitrax. |
$11.99
List $14.99 |
|
|
|
Sets of 3 Signal Masts that can be used as Signal Mast bases in any scale or can be painted and detailed as N-scale signal masts.
MORE INFO
|
|
SDCK Signal Driver Cable Kit (Due September 15)
Digitrax. |
$15.99
List $19.99 |
|
|
|
Materials for making 2 Signal Driver Cables for SE8C. Includes 20 feet of 10-wire ribbon cable and 8 Ten pin connectors.
MORE INFO
|
|
SMHK Signal Mounting Hardware Kit (Due September 15)
Digitrax. |
$9.49
List $11.65 |
|
|
|
Under layout mounting hardware for Signal Driver Cables and sockets. 6 metal signal straps and 6 signal spacers.
MORE INFO
|
|
TSMK Terminal Strip Mounting Kit (Due September 15)
Digitrax. |
$11.99
List $14.99 |
|
|
|
Terminal strip board with resistors installed for easy installation of most brands of LED type signal masts.
MORE INFO
|
|
LF100XF
Lenz. |
$19.50
4 @ $18.50, 10 @ $17.50
List $22.95 |
|
|
|
Function only decoder with extended
effects. 4 functions, 0.4A.
|
|
LS100
Lenz. |
$84.95
List $99.95 |
|
|
Accessory decoder, all scales,
4 functions, w/feedback (4 outputs)
Compare to
others.
|
|
|
LS150
Lenz. |
$49.95
List $59.95 |
|
|
|
Controls up to 6 independent switch machines,
compatible with all NMRA DCC systems. 1024 accessory decoder
addresses, sequential or up to 6 independent addresses can
be used. High amperage output to enable safe operation of
Peco and Atlas dual coil switch machines, each output short
protected. Any combination of 6 Atlas, Bachman Easy Track,
Kato Unitrack, LGB turnouts, Peco, Tortoise™,
or other popular brands.
MORE
PICTURE
REVIEW!
|
|
|
|
Due to manufacturer production issues we are not currently accepting orders for this item. Please check the site regularly for the actual release.
Signal decoder for up to 4 signal heads. |
|
|
|
|
|
Used for
Kato Turnout Motors, features a single output.
Review!
|
|
|
 |
Stationary decoder. The SMD82 is an
eight (8) output DCC accessory decoder specially suited
to drive switch (turnout) machines. It features 16 remote
and four local programmable routes. The SRC8 can be
used with the SMD8 to provide switch position reporting
(feedback) if desired.
More
details at Stationary Decoder Comparison |
|
|
 |
Switch and route controller. The SRC8
is specially suited to control switch (turnout) machines
via LocoNet. It has connections for eight (8) pairs
of push buttons and eight (8) pairs of switch (turnout)
status LEDs. The outputs can also drive low current
stall motor type switch machines such as the Tortoise™.
Using SRC8 with DCC Specialties Products (external) |
|
|
 |
The Switch and Route Controller (SRC16) is specially suited to control switch (turnout) machines. It has 16 inputs and 16 outputs. It can drive switch (turnout) status LEDs and low current stall motor type switch machines such as the Tortoise™. The SRC16 has eight routes. |
|
SM104
System One. |
$64.00
4 @ $61.00, 10 @ $60.00
MSRP $75.00 |
|
|
|
Stationary Switch Machine Decoder
- 4 switches, all scales, 4 amps, 4 functions
Comparison
of Stationary Decoders
|
|
|
